Process-tube and ring opening
Provide the tube outside diameter, bore clearance and the dimensions of the circular hot face shown in the component set.
01Case library
Dual-zone ceramic fiber tube furnace chamber
The cylindrical hot face, split body sections and matched circular components form a dual-zone tube-furnace chamber set.
Dual zoneconfiguration shown
Cylindricalhot-face form
Splitassembly access
02Overview
SYNTHE supplies cylindrical chamber body with zone-related components for multi-zone tube furnace equipment.
03Product requirements
Dual-zone tube furnace chamber: dimensions and included components.
The cylindrical hot face, split body and matching circular pieces form the documented dual-zone chamber arrangement. Zone control still depends on explicitly assigned circuits, sensors and boundary locations.
- Product family
- Dual-zone tube furnace chamber
- Application
- Multi-zone tube furnace equipment
- Included components
- Cylindrical chamber body with zone-related components
- Order quantity
- Prototype, sample or production batch
Two-zone electrical layout
State each heated length, zone boundary, voltage, power, sensor position and the required electrical separation between zones.
Split body and circular parts
Identify the matched halves, covers or rings, their assembly order and any locating or mounting features.
04Dual-zone tube furnace chamber construction
Construction and manufacturing details.
Set the two zone boundaries
Mark heated lengths and the boundary between zones on the tube layout. Keep those dimensions distinct from the total body length.
Identify the split body pieces
Show how the halves and circular components fit around the tube. Include the installation orientation.
Map the two circuits
State the voltage, power, terminals and sensor position for each zone rather than providing only a combined power value.
05Product views
Dual-zone tube furnace chamber: product views.
06Configuration highlights
Product configuration and key dimensions.
- Cylindrical chamber body with zone-related components
- configuration shown: Dual zone
- hot-face form: Cylindrical
- assembly access: Split
- Cylindrical chamber body
- Circular hot-face geometry
- Split body construction
- Matched cover and ring components
07Production & quality checks
Checks applied before packing.
- Check each zone length and its circuit identification separately, then verify alignment through the common tube bore
- Check split-plane or section-joint alignment across the matched set
- Check heated-section lengths, grooves, sensors, leads and terminals when supplied
- Confirm end components, supports, part identification and packing order
08Request a similar product
Specify the dimensions and quantity for your order.
Include Process-tube diameter, tolerance and bore clearance; Two heated-zone lengths and their boundary; Voltage, power, circuits and sensor positions, together with the required quantity and any available drawing or measured sample.
09Related products
More furnace chambers examples.
10Case FAQ
Ordering and customization questions.
01Does a split body automatically create two heating zones?+
No. Split construction provides mechanical access. Independent zones require the corresponding circuits, boundaries and controls.
02Which electrical values should be listed for a dual-zone inquiry?+
List voltage, power, lead and terminal positions, and sensor information by zone.
12Similar product quotation
Request a similar dual-zone tube furnace chamber.
Email the example name, the dimensions or features you need changed, operating temperature and quantity. A drawing or photograph is welcome.