OD120 body size
Confirm whether OD120 is the required outer diameter, then provide the process-tube diameter, bore clearance and total chamber length.
01Case library
OD120 ceramic fiber tube furnace chamber
Split ceramic fiber sections, resistance-element grooves and matched end caps form a compact OD120 tube-furnace chamber set with service access at the split joint.
OD120recorded outer diameter
Splitservice access
End capmatched component
02Overview
SYNTHE supplies tube chamber sections with end-cap components for tube furnace OEM equipment.
03Product requirements
OD120 tube chamber with end cap: dimensions and included components.
Process-tube diameter and clearance set the bore, while heated length, access method, supports and electrical zones determine the length, split surfaces and outer profile.
- Product family
- OD120 tube chamber with end cap
- Application
- Tube furnace OEM equipment
- Included components
- Tube chamber sections with end-cap components
- Order quantity
- Prototype, sample or production batch
Split-chamber access
Mark the split plane, opening direction, joint faces and the supports or clamps that retain the matched halves.
End-cap relationship
Dimension the end-cap bore, outside profile, overlap and any unheated transition between the cap and the main chamber.
04OD120 tube chamber with end cap construction
Construction and manufacturing details.
Set the bore from the process tube
Tube outside diameter and radial clearance establish the working bore before the OD120 body and wall thickness are finalized.
Align grooves across the split
Element routes, joint edges and lead exits are positioned so the two chamber halves remain a matched set.
Fit the end components to the same axis
The main bore and end-cap opening are checked together to avoid a step at the tube entry.
05Product views
OD120 tube chamber with end cap: product views.
06Configuration highlights
Product configuration and key dimensions.
- Tube chamber sections with end-cap components
- recorded outer diameter: OD120
- service access: Split
- matched component: End cap
- Protected component group
- Split chamber and end-cap relationship
- Open section with visible grooves
- Matched halves and circular parts
07Production & quality checks
Checks applied before packing.
- Check the OD120 body, bore axis and end-cap fit against the same drawing datums
- Check split-plane or section-joint alignment across the matched set
- Check heated-section lengths, grooves, sensors, leads and terminals when supplied
- Confirm end components, supports, part identification and packing order
08Request a similar product
Specify the dimensions and quantity for your order.
Include Process-tube outside diameter and required bore clearance; OD120 confirmation and total chamber length; Split access, orientation and retaining method, together with the required quantity and any available drawing or measured sample.
09Related products
More furnace chambers examples.
10Case FAQ
Ordering and customization questions.
01Can the OD120 tube chamber with end cap be manufactured in different dimensions?+
Yes. Send the required dimensions, operating conditions, equipment interfaces and quantity for the OD120 tube chamber with end cap. The quotation and production drawing will state the supplied configuration.
02Can I order one OD120 tube chamber with end cap before a production batch?+
Yes. MOQ can start at one unit or a sample. Approved dimensions and inspection points can then be used for repeat orders.
12Similar product quotation
Request a similar OD120 tube chamber with end cap.
Email the example name, the dimensions or features you need changed, operating temperature and quantity. A drawing or photograph is welcome.