Choose the required size from the equipment
The five photographed chambers illustrate different bores and body sizes; provide the actual process-tube and furnace-envelope dimensions for quotation.
01Case library
Split ceramic fiber tube chamber size-set
Five full-length split chambers use different bores, body thicknesses, heated lengths and resistance-wire layouts for different furnace envelopes.
5 formatssplit chambers shown
Splitservice access
Resistance wireelement form visible
02Overview
SYNTHE supplies resistance-heated split tube chambers in several bore and body sizes for tube furnace OEM equipment.
03Product requirements
Split tube chamber size set: dimensions and included components.
Process-tube diameter and clearance set the bore, while heated length, access method, supports and electrical zones determine the length, split surfaces and outer profile.
- Product family
- Split tube chamber size set
- Application
- Tube furnace OEM equipment
- Included components
- Resistance-heated split tube chambers in several bore and body sizes
- Order quantity
- Prototype, sample or production batch
Layered split construction
State the required bore, wall build-up, split access and any difference between the hot-face layer and outer insulation layer.
Resistance-wire layout
Provide heated length, element material, voltage, power, circuits, groove arrangement, leads and sensor locations.
04Split tube chamber size set construction
Construction and manufacturing details.
Size each chamber independently
Bore, wall thickness and heated length are established from the corresponding furnace rather than scaled from another photographed format.
Keep both layers aligned at the split
The hot face and outer insulation are matched across the opening plane and along the full chamber length.
Match the wire layout to the available face
Groove spacing and end margins change with bore size, heated length and the required electrical circuit.
05Product views
Split tube chamber size set: product views.
06Configuration highlights
Product configuration and key dimensions.
- Resistance-heated split tube chambers in several bore and body sizes
- split chambers shown: 5 formats
- service access: Split
- element form visible: Resistance wire
- Five split chamber formats
- Bore and body-size comparison
- Resistance-element routes on the hot face
- Matched split chamber halves
07Production & quality checks
Checks applied before packing.
- Check bore, wall and heated length for each chamber size; keep the matched split halves identified as a set
- Check split-plane or section-joint alignment across the matched set
- Check heated-section lengths, grooves, sensors, leads and terminals when supplied
- Confirm end components, supports, part identification and packing order
08Request a similar product
Specify the dimensions and quantity for your order.
Include Process-tube diameter and bore clearance; Required chamber bore, outside size and length; Layer build-up and split access, together with the required quantity and any available drawing or measured sample.
09Related products
More furnace chambers examples.
10Case FAQ
Ordering and customization questions.
01Can the split tube chamber size set be manufactured in different dimensions?+
Yes. Send the required dimensions, operating conditions, equipment interfaces and quantity for the split tube chamber size set. The quotation and production drawing will state the supplied configuration.
02Can I order one split tube chamber size set before a production batch?+
Yes. MOQ can start at one unit or a sample. Approved dimensions and inspection points can then be used for repeat orders.
12Similar product quotation
Request a similar split tube chamber size set.
Email the example name, the dimensions or features you need changed, operating temperature and quantity. A drawing or photograph is welcome.